DURKOPP ADLER 559 - Operations Instructions download pdf (Page 10)

6. Assembly of the control

Attention!

The control must not stand on the floor because otherwise the

ventilation grid are covered. This can lead to the overheating of the

control.

–

Screw the control on the underside of the table top with the

screws 2 and 3. The side c arrying the data plate points to the

front.

–

Connect all plugs in field 1 and 4 with the respective bushes. The

plugs are clearly marked with an imprint on cable 8 and the

bushes at the casing 7! C able and bush have the same

designation. Check whether every plug is in the correct bush !

–

Screw plugs and bushes together.

–

Finally screw 6 the protective bracket 5 under the table top so

that the cables cannot be ripped out or damaged inadvertently. In

addition secure the protective bracket by screwing it together with

the control using the screws 10.

19 4 10 5

827 3 6

X20 X30 X40 X50

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

DURKOPP ADLER 559 - Operations Instructions Page 10