DURKOPP ADLER 512 Operations Instructions download pdf (Page 33)

Operation

Operating Manual 512/532 Version 00.0 - 12/2013 31

7. Tighten the knurled screw (3).

8. Remove the button.

9. Adjust the button mount so that the button is securely held, by

loosening the knurled nut (3) and lightly adjusting the lever (2).

4.9 Shank shaper (optional)

Figure 10: Shank shaper

The button clamp can be optionally equipped with a shank

shaper (3).

Pivoting the shank shaper in/out

1. Manually swing the pivoting lever (2) with shank shaper (3) in

and out, with the button clamp raised.

Setting the shank length

1. Turn the adjusting screw (1):

• Clockwise = Shank becomes longer.

• Counterclockwise = Shank becomes shorter.

②

(1) – Adjustment screw

(2) – Pivot lever

(3) – Shank shaper

(4) – Screw

④

③

①

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 89 90

Operating Instructions 1
Contents 6
1 About this operating manual 7
1.4 Other documents 9
1.5 Liability 10
About this operating manual 12
2 Technical Specifications 13
2.3 Declaration of conformity 15
2.4 Technical data 15
Technical Specifications 16
Dimensional data 16
3 Safety Information 17
Safety Information 22
4Operation 23
(1) – Thread regulator 25
(3) – Screw 25
4.4 Winding the hook thread 26
(1) – Tension spring 29
(2) – Regulating screw 29
4.7 Changing needle 30
Operation 31
(1) – Button mount, left 32
(2) – Lever 32
(3) – Knurled screw 32
(4) – Button mount, left 32
4.9 Shank shaper (optional) 33
4.10Sewing 34
4.11 Customer service 35
5 Settings via the software 37
Settings via the software 38
1. Main power switch ON 38
5.3 Referencing the machine 39
5.5 Scaling the axes 39
5.5.2 Scaling the Y axis 40
5.6 Setting the speed 41
5.9 Bobbin winding 42
5.10Sewing 43
5.11 Counter 43
5.12Pausing sewing 44
5.14Saving seam appearances 44
5.18Finishing sewing 48
5.22Working with a USB stick 53
5.23Error messages 55
6 Maintenance 61
Maintenance 62
Maintenance work: 62
6.2 Lubrication 63
(1) – Lubrication points 66
7 Seam appearances 67
Seam appearances 68
8.3 Assembly 74
(1) – Connection cable 75
(2) – Connection cable 75
(3) – Main switch 75
(4) – Table plate 75
(5) – Control cabinet 75
(1) – Scale (2) – Screws 77
② ③ ④ ⑤① 78
8.3.8 Electrical connection 80
8.3.11 Mount the hood 81
8.3.12 Fit the eye protection 81
(1) – Screw 82
(2) – Retainer 82
(3) – Button container 82
8.5 Sewing test 83
9 Disposal 85
Disposal 86
10Appendix 87
Appendix 88

Comments to this Manuals

No comments

DURKOPP ADLER 512 Operations Instructions Page 33

Comments to this Manuals

Related products and manuals for Sewing machines DURKOPP ADLER 512