DURKOPP ADLER 512 Operations Instructions download pdf (Page 44)

Settings via the software

Operating Manual 512/532 Version 00.0 - 12/201342

5.12Pausing sewing

1. Press the Reset button or press the pedal backwards.

 Sewing process paused, display shows error message E-50.

2. Press the Reset button or press the pedal forwards to continue

sewing.

5.13Disabling standard seam appearances

Standard seam appearances can be disabled so that they are no

longer displayed.

Prerequisite:

• Machine is in programming mode, Ready button LED is off.

1. Press the Memory button and button P1 at the same time.

 The Program display shows the seam appearance number,

the Function shows 0 or 1:

0 = Seam appearance is displayed.

1 = Seam appearance is disabled.

2. Press the +/– Function buttons to select a different seam

appearance.

3. Press the Ready button to confirm the seam appearance.

4. Press the +/– Function buttons to select between 0 and 1.

5. Press the Ready button to confirm the value.

6. Press the Memory button.

5.14Saving seam appearances

Standard seam appearances can be stored under the seam

appearance buttons P1 to P5, with a total of 50 memory locations

available.

The memory locations are called up via the +/– Function buttons,

the memory locations up to number 25 can also be called up using

single seam appearance buttons and combinations of these.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 89 90

No comments

DURKOPP ADLER 512 Operations Instructions Page 44